Fahad Aziz

A dedicated engineer willingly to take challenges and solve engineering problems with nearly 9 months of industrial and professional experience in numerical analysis including Computational Fluid Dynamics and Finite Element Analysis, mechanical CADmodelling and machine design. During my bachelor's academic period, I have become proficient in some of the prominent software which are being widely adopted by the Electronics and Mechanical Industries. Circuit simulations, embedded systems, signal processing, control systems, Micro-controller based systems, etc.

• Prototype Engineer 

February 2022 - August 2022 (7 months)

 Karāchi, Sindh, Pakistan 

Design and manufacturing of Vertical Axis Wind Turbine miniature in which CFD simulations with different airfoils and blade shapes were performed. list of tasks performed: 1. Conceptual model was built based on modern research on SOLIDWORKS. 2. Iterative study conducted related to change in blade's airfoil, shape, and orientation and analyzed on Star-CCM++. 3. Geometric optimization to counter any mechanical part failure. 4. Fabrication of VAWT.

• UAV System Engineer 

November 2021 - March 2022 (5 months) 

Karāchi, Sindh, Pakistan 

Executed a roadmap study leading to aerodynamic stability of fixed wing UAV and development of autopilot modes. List of tasks assigned and delivered: 1. Improvement of Center of Gravity location to counter excessive lift generated due to downwash effect. 2. Control surfaces trim position on ground and during flight. 3. Acquired control derivatives for steady level flight.4. PID based modes with negligible steady state error for Level 3 autonomous flight(NATO autonomy classification) including auto take-off(altitude hold), circuit cruise(heading control) and auto landing (glide path angle). 5. Detailed documentation of assigned tasks for publication purpose.

• Pakistan Aeronautical Complex Kamra

 Engineer Intern

 December 2019 - January 2020 (2 months) 

 I have done internship in Pakistan Aeronautical Complex in which I acquired knowledge of manufacturing of JF-17 mechanical parts on CNC and Lathe. Experienced operations of different types of CNCs and their components: i- 3-axis vertical CNC (THS-100 Sinumerik) ii- forestline Bridge type CNC iii- 3 axis CNC (TK5 660C) Plant Maintenance Installation (PMI) visit conclusion: -> acquired knowledge of maintenance SOPs and Levels of maintenance. -> CNC installation and inspection methods -> purpose of maintaining CNC log book

• PAF-Karachi Institute of Economics & Technology Bachelor of Engineering - BE, Mechatronics, Robotics, and Automation Engineering · (January 2018 - January 2022)
•  Government Degree College Malir Cantt Intermediate, Pre-Engineering · (June 2015 - May 2017) 
• Fauji Foundation Model School High School, Computer Science · (April 2013 - July 2015)