Concrete & Post-tensioning Inspector - Abu Dhabi, United Arab Emirates - MPH Global Services

MPH Global Services
MPH Global Services
Verified Company
Abu Dhabi, United Arab Emirates

1 week ago

Ahmed Al-Mansouri

Posted by:

Ahmed Al-Mansouri

beBee Recruiter
Description

Industry:
Nuclear

City/Country:
Abu Dhabi, United Arab Emirates (UAE)

Location:
Abu Dhabi


Responsibilities:


  • General visual examinations of concrete surfaces shall be performed per ASME IWL2300 to assess the general structural condition of containments. The general visual examination shall be performed in sufficient detail to identify areas of concrete deterioration and distress, such as defined in ACI 201.1R.
  • Detailed visual examinations shall be performed to determine:
  • Magnitude and extent of deterioration and distress of suspect concrete surfaces initially detected by General visual examinations.
  • Condition and any deterioration of concrete surfaces at tendon anchorage areas.
  • Condition (e.g., cracks, wear, or corrosion) of tendon wires or strands, and anchorage hardware, as described in ASME IWL 252
  • Visual examinations shall be performed directly or remotely, with adequate illumination, by qualified personnel with visual acuity sufficient to detect evidence of degradation.
-
Inspectors who perform in-service inspections shall have sufficient experiences in the inspection and shall be the qualified persons who have completed sufficient training and education. Qualification shall be given in accordance with the qualification procedures of the contractor in accordance with Owner's QA Manual and Owner submitted procedure.


Qualifications:


  • Shall be approved by the Responsible Engineer and shall be qualified by satisfying the following requirements:
  • At least 10 hours plant experience, such as that gained by plant personnel involved in inspection, maintenance, or repair/replacement activities in each of the following: Structural concrete and reinforcing steel & Post‐tensioning system components (for plants with post‐tensioning systems only).
  • Pass ASME certification
  • At least 4 hours of training in Subsection IWL requirements and at least 2 hours of training in plant‐specific procedures for Subsection IWL visual examinations. Training shall include requirements for inservice and preservice examinations and reporting criteria
More jobs from MPH Global Services
See all jobs of MPH Global Services