beBee background
الصفحة الرئيسية
>
المهنيون
>
التصنيع/الميكانيكا
>
Abu Dhabi
Abegail Ramos

Abegail Ramos

QA/QC Engineer with 14 years of Experience

الخدمات المعروضة: المهندسون الكيميائيون , المهندسون , تصنيع المنتج , الهندسة (الميكانيكية/الكيميائية/المدنية/الكهربائية) , خدمات إدخال البيانات

Abu Dhabi, أبوظبي
د.إ25 / ساعة
معدل تقريبي

اجتماعي


حول Abegail Ramos:

  • 14.5 years manufacturing work experience in Quality Control and Assurance and Chemical Engineering ranging from being a QA/QC Engineer of a Glass Processing Company, Semiconductor Plating Process Engineer and Oils and Lubes Laboratory Analyst.
  • Certified Six Sigma Green Belt Professional by IQA and undergone training for Certified Quality Engineer (CQE). 
  • Attained project approvals for REM Light Metro Station in Montreal, Canada, Jumeirah Gate Tower, The Louvre Abu Dhabi, Mamsha Al Saadiyat, Per Village Long Branch, Riyadh Bus Transit, etc.
  • Part of the team who headed the ISO and IGMAC, EXPRO CLUB Gold Membership Certifications and Renewals for WAE – Glass Processing. 
  • Achieved approval of Glass Units monitored and evaluated for Projects such as REM Light Metro Station in Montreal, Canada, Jumeirah Gate Tower, The Louvre Abu Dhabi, Mamsha Al Saadiyat, Per Village Long Branch, Riyadh Bus Transit, Dubai International Airport Phase 3 Elevators, Cleveland Clinic AUH, Baku New Terminal, Singapore Sports Hub, Doha Convention Center, 1263 Tower Kuwait, ADNOC Head Quarters to name a few prior project approval.
  • Evaluation and approval of raw materials used in glass processing (primary and secondary seal, PVB interlayer, desiccant, etc.) in relation to quality and cost effectiveness.
  • Decreased occurrence of quality issues encountered in relation to processing and machine conditions.
  • Achieved 4 approved improvement evaluations for Ibiden Philippines Inc. plating line/s (Flip Chip Ball Grid Arrays and Graphic Processing Units manufacturing plant)
  • Reoptimized process parameters for encountered quality problems to achieve production target
  • Research and development for new lube product based on market demand
  • Comfortable with working in team or independently and communicating with other manufacturing departments

تجربة

SENIOR QA/QC ENGINEER -   WHITE ALUMINIUM ENTERPRISES LLC. - GLASS PROCESSING DIVISION ABU DHABI, UAE

ISO 9001:2015, ISO 14001:2015  AND ISO 45001:2018 Certified by QRS 

August 2010 to November 2020

  • In-Charge of QA/QC Department from 2019 until 2020
  • Organize the daily tasks of the QC inspectors to ensure that the quality requirements and specifications are achieved and collects and control of quality records, documents and references
  • Trains QC Inspectors to accomplish specific QA/QC tasks
  • Prepares, revises and maintains quality manual and other quality management documents. Participates in implementation of IMS
  • Highly committed in identification, analysis, immediate action and prevention of non-conformance on products and materials
  • Executes root-cause analysis using different quality tools to identify the main reason for the occurrence of the non-conformance. Conducts scientific and statistical analysis of records and observations
  • Ensures that all quality guidelines, work instructions and inspection procedures are carried by all workers 
  • Provide quality reports pertaining to quality issues, non-conforming raw materials for Supplier Claim, results of inspections and audits, results of conducted tests or experiments, results of site inspection and other matters related to QA/QC
  • Review of Job Orders during production to ensure that Customer requirements are complied. 
  • Monitors and ensures that all measuring equipments used in respective sections are well maintained and calibrated
  • Review of project specifications for compliance and conduct project submittals (LEED, Estidama, Green Building, etc.). Issue internal project specifications for approved projects
  • Review of contracts or supply agreements related to quality of glass to know if there are any stringent requirements which needs to be complied or discussed with the Customer
  • Assists QC Manager for technical inquiries from Customers
  • Assists QC Manager during application and renewal of WAE certifications
  • Update of WAE’s Pre-qualification documents

PROCESS ENGINEER – PLATING (ENGINEERING DEPARTMENT) – IBIDEN PHILIPPINES INCORPORATED 

ISO 9001 and ISO 14001 Certified by TUV SUD 

November 2007 to February 2010

  • ­­Ensured process line stability and sustainability 
  • Conducted line audits for input and output process parameters to ensure that good process performance and quality products are manufactures.
  • Conducted inline evaluation for machine, capacity, and quality improvement as well as cost reduction
  • Attended line abnormality and investigate possible root cause of  problem encountered most specially those concerning product quality (for all processes concerned)
  • Performed evaluation inline for new technologies adopted in IBIDEN Co. Japan Ltd for Flip Chip Ball Grid Arrays and Graphic Processing Units
  • Coordinated with Manufacturing Team for implementation and strict compliance of Standard procedures and Work Instructions to be followed during lot processing.
  • Attended Disposition Review Board for Quality Problems encountered for process owned for possible root cause and proper affected lot disposition (continue lot processing or scrap the lots).
  • Use DOE,FMEA, FTA and SPC tools in analysis and assessment of inline improvements and quality issues
  • Knowledge of CVS Machine, UV-VIS and Plating Solution analysis procedures

JUNIOR LABORATORY ANALYST (TS DEPARTMENT) – UNIOIL PETROLEUM PHILIPPINES INCORPORATED (Unioil Refinery Corporation) 

ISO 9001 Certified by Certification Internationale

June 2006 to October 2007 

  • Conducted Quality control monitoring and Laboratory analysis for incoming raw materials, in-process and finished products
  • Responsible for products formulation and blending issuance for lube and oil products.
  • Standardization of reagents used for analysis.
  • Calibration and maintenance of tests equipments
  • Analysis of technical samples from customers as well as product matching
  • Product development to match customer’s needs and market demands
  • Documentation of test results, reports and work procedures as required by ISO 9001 certification

التعليم

AWARENESS AND INTERNAL AUDIT TRAINING (QRS)                                                        September 9, 2020

ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018

 

INTERNAL AUDIT TRAINING (QRS)                                                                                           August 29, 2017

ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007

 

CERTIFIED SIX SIGMA GREEN BELT (Certificate No. AR11596)                                           May 16, 2015

International Quality Federation

 

ADVANCE CONCEPTS IN QUALITY ENGINEERING (Certificate No. 9610, 40 HOURS)     October 1, 2013

Franklin University, Ohio, USA 

 

QUALITY ENGINEERING (CQE-ASQ CQE, Certificate No. A 4874) (40 HOURS)                 September 13, 2013

Chicago Training Course 

 

BACHELOR OF SCIENCE IN CHEMICAL ENGINEERING (MINOR IN ENVIRONMENTAL ENGINEERING) 

MAPUA INSTITUTE OF TECHNOLOGY Philippines                                                FEBRUARY 2006

المحترفون الذين يقدمون خدمات مماثلة لتلك الخاصة بـ Abegail Ramos

محترفون من نفس قطاع التصنيع/الميكانيكا مثل Abegail Ramos

المحترفون الذين يقدمون خدمات المهندسون الكيميائيون

المحترفون الذين يقدمون خدمات المهندسون

المحترفون الذين يقدمون خدمات تصنيع المنتج

المحترفون الذين يقدمون خدمات الهندسة (الميكانيكية/الكيميائية/المدنية/الكهربائية)

المحترفون الذين يقدمون خدمات خدمات إدخال البيانات

محترفون من قطاعات مختلفة بالقرب من Abu Dhabi, أبوظبي

المستخدمون الآخرون الذين يطلق عليهم Abegail

وظائف بالقرب من Abu Dhabi, أبوظبي

  • Wood

    Flow Assurance Engineer

    تم العثور عليها في: Talent AE C2 - منذ يومين


    Wood Abu Dhabi, الإمارات العربية المتحدة دوام كامل

    Wood has been awarded a major project with ADNOC and, we are looking to hire a Flow Assurance Engineer to be based at our Abu Dhabi Engineering Center. · Responsibilities: · Responsibility for the t ...

  • Miral Experiences

    مدير نظام معلومات الموارد البشرية

    تم العثور عليها في: DrJobAR AE A2 - منذ 5 أيام


    Miral Experiences أبوظبي, الإمارات العربية المتحدة

    تعاون مع فريق الموارد البشرية باستخدام Oracle Fusion HCM لمهام إدارة الموارد البشرية وإدارة البيانات. · ضمان الدقة والامتثال أثناء جمع البيانات والتحقق منها وتحديثها في أنظمة الموارد البشرية. · استخدم ...

  • KBR

    Senior Static Engineer

    تم العثور عليها في: Talent AE C2 - منذ يومين


    KBR Abu Dhabi, الإمارات العربية المتحدة دوام كامل

    Title: · Senior Static Engineer KBR is a global provider of differentiated professional services and technologies across the asset and program life cycle within the Government Services and Hydrocarb ...