Mohamedigbal Abdulrazack

Good Day !
      Please refer my resume for the above mentioned position, I have great experience and knowledge on oil  and gas Upstream/Midstream/Downstream process/Operations.
Total Experience  - 11.4 Years
Plant & Equipment Handling - Wellhead, Three-phase separator, Booster Compressor, Exchangers, Chiller, Fin-fan cooler, Pumps,Scrubber, Integrated water bath heater, IAC Compressor, Glycol dehydration unit operations, Amine Recovery unit, DCS,SCADA,Pigging, Hot Tapping, Startup and shutdown activities, well testing / integrity / Slickline/ Coil tubing  coordination, Safety critical equipments, P&ID Marking, etc.
Documents Handling- PTW,SOP PREPARATION, MOC INITIATIVE, DAILY REPORT PREPARATION, WELL DATA MANAGEMENT, FRONT LINE MAINTENANCE, SAP,PROCESS SAFETY MANAGEMENT, FIELD CHECK LISTS MAINTAINING, SAFETY EQUIPMENT AND PLANT EQUIPMENT STATUS RECORDS, ETC.

Thanks & Regards
Mohamed igbal 
Skype ID: mohamedigbal.abdulrazack
 

2011    B.Tech. Degree in Chemical Engineering
FromAdhiparashakthi Engineering College,Melmaruvathur, with an aggregate of 76%
EXPERIENCED PLANT :
Well Head operations(Christmas tree),Gas lifting and injection
Glycol dehydration unit, Gas sweetening process.
DCS & SCADA PANEL OPERATION (YOKOGAWA)& Honeywell 
Oil and Gas Gathering Station,Offshore Production Platform
Artificial Lifting System,Gas Plant
Central Production facility & Tank Farm,Water Treatment & Injection Plant
Chemical dozing unit,Fuel gas system,Flare system.
Distillation columns,Shell and tube, Double pipe type heat Exchangers.
Centrifugal pump,Positive displacement pumps.
Fin-fan coolers,Power Generation Unit,Propane Chilling Unit 
P&ID references such as distillation columns, Compressor, separator, pumps, vessels etc. 
SAP,MOC initiative, SOP Preparation, Drill Excercise,Table Top Meeting,PSM.
CAREER SUMMARY
TOTAL EXPERIENCE: 11.5 YEARS(offshore & onshore)
I. Since June 2018 –QATARENERGY ,QATAR
SENIOR OPERATOR(PANEL& FIELD)
Department: OPERATION
Responsibilities: 
Carry out assigned Operational work safely to assigned standards in line with Standard Operating Procedures (SOP’s)
Operates the DCS Locally when required for WHT start-up, operations and shut down as per standard procedures. Monitors all plants and Wellhead Towers conditions through displays, graphics and trend logs. Maintains the sub-sea line pressure to meet the injections target of OFFSHORE WHT's.
Operate and monitor the wellhead towers and field activities, including well test using test vessel and MPFM.SIMOPS-Ensures all field work and changes are carried out according to Offshore rules and regulations, efficiently and safely. Carries out fields and plant monitoring and operating plant and field processes through SCADA & DCS,monitors globally and takes suitable actions.
Directs controls the activities of a team of Contracts workforce involved in operating the Production facilities, including starting up / shutting down the wells, first-line maintenance and reservoir monitoring pressure survey, pigging operations, sampling and WHT housekeeping..
Monitor the operation of oil / gas and water production including opening, closing, adjusting wells, operating wellhead equipment, controlling quantities of water injected, to ensure the oil & gas production quantities & quality are as per required target. Reports the results to Team Leader, Production.
Monthly pressure monitoring and depressurisation through Smart Vessel in accordance with Offshore Guidelines
Prepares Procedures and Coordinates with Field Supervisors in implementing such campaigns. Non Routine operations & activities and special campaigns undertaken from time to time such as pigging of pipe lines, mothballing of unused lines, pressure testing of subsea lines, corrosion monitoring on the surface facilities in wellhead Towers and modifications for the existing systems and WHT preparation for Drilling and Production SIMOPS.
Carry out routine checks on equipment for abnormalities to report defects noted in equipment and coordinate with the reporting supervisor to arrange for servicing.
Receive chemicals, maintain the stock/consumption register and prepare chemical batches required for the process ensuring adherence to procedures and while following all HSE procedures and rules.
Ensure compliance to all relevant safety, quality and environmental management policies, procedures and controls to guarantee employee safety, legislative compliance, delivery of high quality products/service and a responsible environmental attitude.
Obtain work permits, follow up on-going jobs and monitor Contractors activities ensuring adherence to safety regulations and procedures
Carry out duties when required during emergencies, as per the Facility Response Plan
Communicate and follow instructions of the Supervisor to carry out duties efficiently and safely.
Prepare various key Performance Indicator commitment checklists for management perusal.
Assists Productions Supervisor in co-ordination with Projects team/ Engineering for Modifications packages and ensures that the work is carried out in a safe environment, Raises PMR and follows up with Maintenance Planning to update maintenance activities.
DCS Yokogawa,Honeywell and Centum-3000 R-3.08 and SCADA Operation
PLC Yokogawa, PLC Mitsubishi, PLC Enerflex, PLC ABB, Honeywell 
Wellheads, Gas manifolds and gathering stations (Valve assemblies), Pig Launching and Receiving, Well startup and shutdown, chemical injection, corrosion and methanol injection packages,Hot tapping,Gas reinjection. Produced Water reinjection.
Inlet Separation with Slug Catcher & High Pressure Separators.
Gas Dehydration with MEG, TEG and Molecular Sieve Bed.
prepared job packs for the area, which include the isolations list, safety pre job check list, commissioning procedures, P & ID marking, punch listing, Blowing, Nitrogen Purging, Pressure and Leak Testing. etc.
Reporting daily shift Activities to Supervisor - Preparing Midnight Readings of Chemicals, Temperature, Pressure, Level, and Shift Status Reports are sending through E-mail to Supervisor. 
Reporting of Equipment and Instrument Defects, Unwanted Noises and Leaks immediately to Supervisor and take possible correct action. 
Checking and recording the Plant Log Sheet each and every day a variety of readings such as Oil and Gas Flow, Temperature and Pressure.
Identified and troubleshoot process equipment, process problems and worked towards solutions
Maintained daily logs of gas consumption and steam production.
Created, approved and processed lockout/tagout permits for blocking out equipment,NDT,Pigging, Hot tapping. 
Safely handled plant trips and correctively brought back the system on time.
II. Since July 2014- May 2018
CAIRN INDIA LIMITED, RAJASTHAN.
PRODUCTION ENGINEER
Department: PRODUCTION
Responsibilities:
Follow PTW system, rules, regulations and work procedures applicable to his responsibilities Monitor, control and log imported and produced oil
Control and execute export oil discharge
Monitor and execute bulk chemicals loading and distribution operations
Monitor and record all safety equipment alarms received in the Cargo Control Room
Maintain radio communication with the Process Deck as applicable
Maintain radio communication with the Export Tanker as applicable
Maintain CCR Logbook and storage tank status records
Undertake training relevant to the position requirements
Familiar with preparing Mid Night Reports, Permit To Work and Isolation Registers
Short Term Isolation Register, Long Term Isolations Register, Fire and Gas Override Check Lists, Preparing Production (Oil, Water and gas) Charts (Daily, Monthly and Cumulative) etc. 
Preparing PMR- Production Maintenance Request for the equipments to be repaired, Preparing Permits, Risk Assessments, Tool Box Talk, Process and Mechanical Isolation Certificates and recording all for future reference. 
Production well testing of oil/gas and water injection wells through separators, Optimization of wells, well head operation (oil and gas). 
Pigging crude Pipelines and water injection line, 
Undertaking day-to-day production operations & maintenance activities. 
Overhaul, repairing, and testing of wellhead valves assemblies, 
Operating and normalizing shut down panels,
Monitoring and recording daily pressure and volumes from wellhead sensing points, assisting with data gathering of samples of well bore fluids for lab analysis, 
Responsible for the safe loading and unloading of materials and equipment. 
Looking after all operational activities of process control and utility system. 
Maintaining the daily records, Involvement / participation in team reviews including HAZOP, Risk Assessment, toolbox talks and safe operating practices and Fully aware of permit to work system, 
Taking active part in shutdown and normalization. Also able to read and interpret written work instructions and technical drawings. 
Fully aware of safety and fire equipment’s and high degree of HSE awareness and attentiveness at all working locations of the platform.
Fully conversant with company operating and Maintenance Procedures, HSE Procedure, and relevant Administration Procedure. 
Monitoring the steady state operation of chemical injection program, looking after the 2-stage and 3-stage separators and the related equipments, Oil Pumping Facilities, skimmer vessels, chemical dosing, produced water conditioning system, Gas Compressors, and related equipments, Knock-out drums, Gas dehydration and Glycol Regeneration system and their related equipments, Sea water lifting and filtration, Deoxygenating and Pumping etc. 
Responsible for maintaining good housekeeping to ensure clean and safe working environment for all employees. 
Plant optimization, process troubleshooting, production planning, plant emergency control, implementing safety systems. 
Responsible for the plant production, process and equipment is troubleshooting and process optimization.
Planning and preparing SOP’s and MOC according to plant jobs – When carried out Pigging operations and plant modification.
Ensure P&ID’s when new MOC’s carried out by Operation team.
SPECIAL INVOLVED ACTIVITIES:
WELL SERVICE,WELL TESTING & SLICK LINE CO-ORDINATION
COMMISSIONING RESPONSIBILTIES
PREPARE START UP AND SHUTDOWN PROCEDURE AND EXECUTION
PANEL MONITORNG (DCS AND SCADA)
PIGGING,NDT,Hot tapping.
III.Since July 2011 To July 2014
OIL AND NATURAL GAS CORPOPRATION, 
MAHARASHTRA, MUMBAI, INDIA.
Worked as PRODUCTION OPERATOR.
Department: PRODUCTION
Responsibilities: 
Ensure adherence to company policies and procedures. 
Effective planning and utilisation of the company assets, equipment and personnel resources. 
he operations of cargo, ballast, inert gas & COW systems in accordance with company procedures and as directed by the chief officer and other deck officers. 
Sampling of cargo tanks/stripping excess water. 
Particular regard for cargo/ballast valve status, tank levels, and operational status of pumps as well as all other cargo /ballast handling equipment. 
Critical responsibility for performing tank cleaning and gas freeing operations. 
Perform cargo, ballast and tank atmosphere sampling. 
Supervise operations and maintenance of production/well testing.
Monitored production of oil, gas, water. Monitored flow rates and line pressures/temps
Tracked fresh water return rates from the fracturing process
Monitored and adjusted separator pressure and levels
Recorded oil and water and gas rates
Practical experience on three-phase mobile Separators, choke manifold, ESD Systems, Rig up and Rig down, Equipment maintenance, re certification arrangement & transportation from base to locations, reporting etc. 
Preparation of equipment’s, transportation, and installation on location, operation monitoring and maintenance of sand filter and associated equipment’s. Certification of equipments, associated paper work and reporting of jobs etc. 
Logging of plant parameters in log sheets, events in log book and also prepare daily shift reports.
To operate online fire & gas detection and anti intrusion system
Follow up of PTW system and maintain their record

B.Tech, Chemical engineering